Product Specifications
| Prod Model: |
D7100 |
| Raw Material: |
93% Natural Quartz Powder |
| Surface Finishing: |
Polished and Matt |
| Water Absorption: |
0.01~0.02% |
| Hardness: |
7 Mohs |
| Flatness: |
<0.1mm |
| Color Tone: |
Consistent |
| Heat Resistant: |
300ºC |
Product Description
12mm Polished Surface Man-Made Quartz Stone
Product Details
All Bestone quartz surfaces are easy to clean and maintain. Our non-porous quartz surfaces require minimal maintenance - there's no need to seal or wax the surface.
Reference
| Slab Size Available | 3200*1600mm and 3000*1400mm |
| Cut Tile Sizes | 400*400, 600*600, 800*800 mm |
| Sand Hole | None |
| Tone & Figure | Consistent |
| Flatness | <0.1mm |
| Angle | <0.2mm |
| Density | 2.3~2.5g/cm3 |
| Water Absorption | <0.05% |
| Flexural Strength | 25~35Mpa |
| Compressive Strength | >200Mpa |
| Moh's hardness | 6~7 Degree |
| Glossiness | >55 Degree |
| Thickness | 12, 15, 18, 20, 25, 30mm |
Characteristic of BST quartz raw materials:
1. High purity of quartz. Over 99.7% content of SiO2
2. High whiteness over 90 degrees of whiteness.
3. High transparency and uniform grain size.
4. BST quartz slabs contain over 93% of quartz materials.
Application:
Quartz Stone is very widely used for countertop, kitchen top, vanity top, table top, kitchen island top, shower stall, tub surround, bench top, bar top, wall, floor in Airports, Metro Station, Shopping Center, Hotel, Restaurant, Bar, Cafe, Apartment, Office and so on.
Production Process:
1.Materials Mixing
2.Moulding
3.Vulcanizing
4.Natural Cooling
5.Slab Sizing
6.Calibrating
7.Polishing
8.Slab QC
9.Slab Filming
10.Slab Packing
11.Slab Loading
Limited Warranty for Bestone Quartz Stone
BESTONE HIGH TECH MATERIALS CO., LTD. (hereafter referred to as BESTONE) warrants to
the original buyer that the Quartz Surfaces, which have been manufactured and fabricated by
BESTONE, are free from Manufacturing Defects. Any claim of manufacturing defects shall be made
either within 30 days after receiving the Quartz Slab/Surfaces or before installation at the site. If
any manufacturing defect occurs, BESTONE will at its option, repair or replace the defected Quartz
Surfaces. In case of replacement, the same quantity (number of slabs) will be supplied for free.
BESTONE shall not cover the costs for transportation, fabrication, installation, or any other
physical and/or moral damages.
Packing & Loading
1.Packing Details:
1.Quartz slabs packed in wooden frames suitable for ocean shipment.
2.Each slab is covered and protected by plastic film.
3.15PCS of 2cm slabs packed each bundle,and 7 bundles fit in a 20'GP container.
4.10PCS of 3cm slabs packed each bundle,and 7 bundles fit in a 20'GP container.
5.Unit weight of 2cm slab is 48kg/Square meter and 3cm slab is 72kg/Square meter.
2.Delivery
15-30 days from receipt of deposit.
Company Information
BESTONE HIGH TECH MATERIALS Co., Ltd. (BST Quartz) is an outstanding developer and manufacturer of quartz stone slabs for 9 years. Boasting a dedicated team of over 200 members devoting to R & D, production, marketing and after-sales service for the quartz stone products and covering an area of 30,000 Sqm, at present BESTONE has Four sets of fully automatic production lines for quartz stone slabs, which enable us to achieve the production capacity more than 30,000 Sqm per month. As the pioneer and leader in the industry, we have been exploring and developing the overseas markets since last 7 years. Our products are mainly sold to Australia, Canada, USA, Europe, Middle East, South America, and so on.
Our Servies
1. Manufacturing quartz stone slab / tile
2. Fabricate quartz counter top / vanity top / table top
3. Standard wood package or customized package
4. Customized Logo Printed / Sprayed / Labeled
5. OEM Color / Design
6. Stock slab retail
7. Prefabricated top retail
8. Other service related to the product or projects
9.Our trade manager is 24*7 online.Emails can be replied within 24 hours.
10.We offer 10 years warranty for commercial projects and 12 years warranty for residential projects.
FAQ
1.Where should the quartz stone be used?
Quartz stone must be used indoor such as kitchen worktops, bathroom and vanity tops
and floor tiles, where are not exposed to direct sunshine.
2.Why should we use quartz stone other than natural stone?
Compared with natural stone, quartz stone has higher density and hardness, less water
absorption, more durable and less maintenance, and better consistent color tone.
3.What sizes of quartz stone slabs are available from BESTONE?
BESTONE standard slab sizes are 126"*63" (3200*1600mm) and 118"*55" (3000*1400mm),and other customized sizes (2200~3200mm) *(1000~1600mm) are also available.
4.How does BESTONE pack the quartz stone slabs?
BESTONE packs the slabs with wooden crate made of 80*80mm solid wood, and surface of
slabs are protected by plastic film.
5.How does BESTONE ship the quartz stone slabs?
BESTONE ships the slabs in 20' GP or OT container, 7 bundles fit a container in which 15
slabs of 2cm or 10 slabs of 3cm each bundle.
6.Is it possible to inspect the cargos in BESTONE factory before loading?
Yes, all customers are warmly welcome to inspect the cargos before loading.
7.Is it possible to do the OEM with BESTONE?
Yes, BESTONE provides the OEM service by printing customer's Logo or company name.
Don't hesitate to contact us at any time!
Rita Zhong
Mobile phone:+86 134 5089 6687
Website: www.bstquartz.com
BESTONE HIGH TECH MATERIALS Co., Ltd. (BST QUARTZ) is an outstanding manufacturer, developer and exporter of Artificial Quartz Stone Slabs with over 10-year's professional experience. Boasting a dedicated team of 200 members devoting to R & D, Production, Sales and Marketing and After-sales Service for Quartz Stone and covering an area of 50, 000 Squre Meter in Guangdong China, BESTONE has totally 4 sets of fully automatic production lines specialized in quartz stone slabs, which enable us to achieve the production capacity more than 600, 000 Squre Meter per year.
As a pioneer and leading player in the Quartz Stone industry, we have been exploring and developing the overseas markets since last 10 years, with the products been sold to USA, Australia, Canada, UK, Italy, Swizerland, European Countries, Mexico, Turkey, Hongkong, Korea, Dubai, Saudi Arabia, Middle East, South Africa, South America, and so on.
During last 5 years, BESTONE's annual turnover has been increasing by 30% owning to our devotion to the marbling /veined collection. We are still working hard on the way of developing the white-based and grey-based collections as well as the marbling/veined collection, which we strongly believe would be the domaining colors in the quartz application now and future!
Besides the quartz stone slab factory, BESTONE is also committed to pre-fabricating quartz countertops based on the shop drawings provided by customers. BESTONE fabrication workshop is well equipped with automatic fabrication facilities. Automatic Infra-cutting machine, Automatic Sink-Cutting Machine and Automatic Edge Polishing Machine are set for fabricating to highest standard of Kitchen Countertops, Vanity Tops, Bar Tops, Shelf Tops, Table Tops, Window Sills, Thresholds, Bath Room Tubs, and Bath Room Walls for high-end projects.
Different edge profiles, like Eased Edge, Pencil Edge, Laminated Edge, Mitered Edge, Bull-Nose and so on, are provided directly to Contractors, Dealers, Hotel Owners, and Fabricators all over the world. A professional project team responsible for color matching, shop drawings, book-matched tops, quality inspection and control, is an absolute guarantee for all our customers.
BESTONE Quartz is always in pursuit of and in line with Nature, Fashion, Individuality and Profession!
Let's make the kitchen more fun and enjoyable!
