Autoclaved Aerated Concrete Block AAC Production Line AAC Brick Machine Line AAC Plant
| Price: |
Negotiable/Piece |
| Min Order: |
1/Piece |
| Pay Type: |
L/C,T/T,D/P |
Product Specifications
| AAC Capacity: |
80000-400000m3 Per Year |
| Experience: |
25 Years Experience |
| AAC Line Working Ways: |
Total Automatic |
| AAC Line Material: |
Building Waste, Tailings, Fly Ash, Sand, etc |
| Oversea Office: |
India, Indonesia, Iran etc. |
| After Service: |
Oversea Service with Professional Team |
| Project Service: |
Raw Material Test, Training , Performance Test |
| Total Plant: |
400+ Plants |
| Type: |
Aerated Autoclaved Concrete Brick Machine Line |
Product Description
GENERAL INTRODUCTION
The AAC production process includes raw material preparation, batching and mixing, pouring, pre-curing, cutting, autoclaving, and packing. The entire line allows process to flow smoothly, from start to finish. The independent circulating line of mould, side plate and autoclaving car can lead the object to the original location and get ready for the next work cycle. The production line can achieve the real total automatic production without waste.Making full use of the land with the advanced overhead conveying system, special overhead cross moving system and hydraulic control system for de-moulding machine, semi-product stacking machine, separator and clamping machine, the investment of simple workshop structure can be reduced.
With decades of experience in serving the AAC blocks production machinery industry, we can supply customers with quality AAC block production lines with capacity ranging from 80,000m3 to 40,000m3 per year.
Once you have decided on the annual output, the mould size and machine model become definite, too. Then according to your specific choice and your local market demand for the size of the AAC block, we will match your AAC block production line with a suitable cutter and other ancillary equipment. For instance, if the 240 mm AAC block is needed in your market, you can choose a cutter with mould size of 4.8 x 1.2m instead of 5×1.2m type, considering that the latter would generate too many concrete wastes during cutting.
AAC MAIN EQUIPMENTS
The pouring mixer can batch and mix products of different densities from B03- B07 grades. With the movable lifting pouring device, the problem of flushing away the de-moulding oil and forming big bubbles caused by traditional pouring method can be effectively solved.
Once using the lifting pouring device to cast the slurry into the freshly mould cleaned and oiled, the lateral opening device for pouring the slurry acts as a cushion to the slurry's fall, so that the oil layer wont be washed away and which can also avoide the slurry splash and large pores . The whole casting cycle is 4~6min.
The four around sides of mould adopt welded section steel as framework, which can ensure the good rigid, stable and non- deformed performance of the mould.With the function of position guide block for the mould locking, the mould locking precision can be ensured and also the sealing rubber can be protected from damage.
With the hydraulic-powered gantry crane to turn concrete blocks to various degrees, the de-moulding machine can avoid the risk of broken caused by the abrasion of wires, and to transit the cake very smoothly without deformation. Instead of using heavy-duty industrial cranes, which lowers the height requirements of your factory, simplifies factory construction, and saves construction cost.
All the steel wire posts are fixed on two main oblique beams and each pair of posts is used to fix only one steel wire, so that the horizontal cutting machine can solve the settlement cracks problem in thin block and panel cutting, and achieve the minimum horizontal cutting thickness of 50MM block out of a whole mould.
The stability and accuracy of the vertical cutting machine can both reach the international advanced level. The integral swing frame can ensure the side plate replacement, the cutting can be synchronized with ferry replacement. With the automatic detection system, the broken wire can be timely detected.
KEDA Group Profile
KEDA, established in 1992 and went public in Shanghai Stock Exchange in 2002 (Ticker Symbol: 600499), is an experienced project organization and technology provider with subsidiaries for wall material, ceramic, artificial stone, coal gasification system, high pressure hydraulic piston pump and blower system.
The main subsidiaries are as follows:
KEDA SUREMAKER, taking over around more than 170 acre in Foshan and maanshan with 4000 staffs and capital registered USD 108.00 million, as the wholly owned subsidiary of KEDA, KEDA- SUREMAKER specializes in providing solution for AAC plant and sand lime brick plant. With the national engineering experiment center and R&D center, KEDA- SUREMAKER can ensure the successful launch of new products. All the main components are processed in one step though clamping and molding by digital machine tools. And all the host equipments will undergo ex-factory loaded commissioning; The key equipments will undergo multi-machine linkage commissioning. With considerate and professional service, KEDA- SUREMAKER has built more than 800 plants worldwide.
KEDA CLEAN ENERGY, Established in 1992 and IPO on Shanghai Exchange in 2002 (security code: 600499), KEDA CLEAN ENERGY Co., Ltd. is a hi-tech company that mainly supplies machinery for clean energy, ceramics, wall materials, stone, and high end machine spare parts, it also offers EPC service. KEDA is the biggest ceramic machine and clean coal gasification system supplier. KEDA has been leading in ceramic industry in the world. Now, comply with national and social development needs, KEDA strives for enterprise transformation and upgrading. At present, KEDA focus on clean energy R&D to impel high efficiency utilization of coal and to be a reputable machinery manufacturer.
HUDU-KEDA has long been devoted to the development and service of advanced turbo machinery equipment. After more than ten years of precipitation and accumulation, it has formed a series of products represented by high speed centrifugal blower / compressor, low speed centrifugal fan / blower. Excellent performance is demonstrated in the pressurization and transportation process of air, gas and other special gas medium.
HUDU-KEDA has a perfect quality system and national technology center, academician / postdoctoral work station, now has many products patent. From 2007 onwards, the company has thousands of sets of various types of products are widely used in the field of chemical industry, metallurgy, power plant, papermaking, medicine, environmental protection, nonferrous metal smelting, sewage treatment, and with high reliability, high efficiency and intelligent features to win market recognition.
Cohen specializes in the flue gas dust removal, desulfurization and denitrification and other ultra-low emissions of environmental protection technology and equipment development, engineering design, project operations and general contracting and it is the national high-tech enterprise managing business of the third party. The company has established a national enterprise technology center, national engineering laboratory of flue gas multi-pollutant control technology and equipment, the national environmental protection industrial furnace flue gas denitrification engineering center, Jiangsu Province enterprise academician workstation, Jiangsu Province key laboratory of new-style environmental protection and other research and development platforms, which have accessed to more than 110 national patents.
KDNEU is committed to integrated services of "engineering planning and design, technical consulting and services, complete technologies and equipments, development of energy-saving technologies and equipments, design and manufacturing of special equipments, project engineering installation and general contracting, process automation and instruments and meters
