Product Specifications
| Prod Model: |
Surtek 3546 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Chemical Base: |
Polyurethane |
| Density: |
~1.4 Kg/L |
| Skinning Time: |
~50 Minutes |
| Curing Rate: |
~2.5 mm/24h |
| Service Temperature: |
-40°c to+80°c |
| Shear Strength: |
~0.8 N/mm^2 |
| Tensile Strength: |
~1.6 N/mm^2 |
| Shore A Hardness: |
~42 |
| Elongation At Break: |
~550% |
| Advantage: |
Solvent Free |
| Bonding Function: |
Structural Adhesive |
| Application: |
Woodworking |
| Material: |
Polyurethane |
| Classification: |
Room Curing |
| Characteristic: |
Waterproof |
| Morphology: |
Solvent Free |
| Color: |
Parquet Brown |
Product Description
Description
Surtek 3546 is a one-part polyurethane adhesive for direct elastic bonding of timber floors. The adhesive is of low viscosity and cures on exposure to atmospheric moisture.
Advantages
1-component, ready to use
Solvent free
Fast curing properties
Floor can be sanded after 12 hours (full surface bonding,+23°C/50%r.h., up to 1 mm adhesive thickness)
Excellent workability, very easy to extrude
Good initial tack
Odorless
Elastic, footfall sound-dampening adhesive
Suitable for most common types of wood floors
Especially suitable for problematic woods including beech, maple and bamboo
Suitable for bonding wood floors directly onto old ceramic tiles
Reduces stress to the substrate: the elastic adhesive reduces stress transfer between the wood floor and the substrate
Suitable for use with sub floor heating
Compensates for some substrate unevenness
Adhesive can be sanded
Technical Data of Surtek 3546
| Color | Parquet brown |
| Packaging | 600ml sausages (20sausages per box). / 25kg barrel |
| ChemicalBase | 1-part Polyurethane, moisture curing. |
| Density (DIN 53479) | ~1.40kg/L |
| Skinning-/Laying Time | ~50 minutes (+23°C/50%r.h.) |
| CuringRate | ~2.5 mm/24h (+23°C/50%r.h.)
The floor may be walked or sanded 12 hours to 24 hour safter installation (+23°C/50%r.h.up to1 mm adhesive thickness dependent on climatic conditions and adhesive layer thickness). |
| SagFlow | Consistency:
Spreads easily, trowel marks stable. Easily applied by guns. |
| Service Temperature | -40°C to +80°C |
| Shear Strength | ~0.8 N/mm2 (+23°C/50%r.h.) |
| TensileStrength | ~1.0 N/mm^2 (+23°C/50%r.h.) |
| Shore A Hardness | ~ 42 |
| ElongationatBreak | ~550% |
Detailed Image
Application FieldsFor Full Surface bonding:
Solid and engineered wood floors-(strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet, wood paving (residential) as well as chip boards can all be fully bonded
Elastic Bonding of skirting boards/ baseboards and door thresholds etc.
Application DetailsConsumption:
Full Surface Bonding:
700 - 900 g/m2 with notched trowel B3 (acc. To IVK guidelines) or 3/16" 1/8" 1/8" (engineered strips / planks, mosaic parquet etc.).
800 - 1000 g/m2 with notched trowel B11 (acc. to IVK guidelines), AP 48 or 3/16" 3/16" 3/16" (solid wood,engineered planks / panels, industrial parquet, wood paving (residential), chipboards etc.).
For bonding of long or wide boards or on uneven substrates it may be necessary to use a notched trowel with biggernotches (to prevent hollow sections).
Beaded Application:
~ 44 ml per running meter = 250 - 500 g/m2, dependent on bead spacing (solid wood boards, 3-ply engineered wood,chipboards).
Substrate Quality:
Clean and dry, homogeneous, even, free from grease, dust and loose particles. Paint, laitance and other poorly adhering particles must be removed. Standard construction rules must be observed.
Application InstructionsApplication:
Full Surface Bonding:
Surtek 3546 is applied to the prepared substrate directly from the pail and uniformly distributed by notched trowel. Press the wood floor pieces firmly into the adhesive so that the underside is fully wetted. The pieces can then be joined together using a hammer and an impact block. Many types of wood floors have to be tapped from the top. A distanceof 10 - 15 mm from the wall to the wood floor must be maintained.
Beaded Application:
After inserting the sausage into the gun, extrude a triangular shaped bead of adhesive approximately 10 mm high and 8mm wide at 100 - 250 mm centres (dependent on wood floor type) on the prepared sub floor. Press the wood piecesfirmly into the adhesive (at right angles to the adhesive beads). The elements can then be joined together using a hammer and an impact block. The required distance from the wall to the wood floor in the laying instructions from the wood floor manufacturer must be maintained.
Note: The laying instructions of the wood floor manufacturer must be observed.
Packaging600 ml sausages (20 sausages per box).
Storage and Shelf Life9 months from date of production if stored in undamaged, original sealed containers, in dry conditions and protected from direct sunlight at temperatures between+10°C and+25°C. Our Company and Certificate 
Comens New Materials is a listed company in China ("Comens Materials", Stock Code:300200.SZ) committed to providing professional solutions for bonding (including lamination, wrapping, etc.), sealing and protection in the field of soft packaging, assembling, construction, furniture and building materials, etc.Series of adhesive, sealant, resin and coating have been developed based on polyurethane, silicon and MS (modified silicon).With the most-wide product range, best reputation and highest market share in China, Comens has been recognized as No.1 in China and the second largest producer in Asia in the field of polyurethane adhesives and sealants.
Following the mission of "satisfy diversified demand, provide professional service", Comens is striving to be a worldwide competitor in polyurethane adhesives, sealants and coatings.
