Industrial Autoclave AAC Autoclave Aerated Concrete White Panels and Blocks

Product Specifications

Prod Model:	AAC Wall Panel Floor Panel
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Name:	AAC Panels/Alc Block/AAC Bricks
Width:	600mm
Thickness:	50/75/100/125/150/175/200mm
Colour:	White
Compressive Strength:	Above 3.5MPa
Thermal Conductivity:	0.13W/M*K
Dry Thrinkage:	0.48mm/M
Dry Density:	Less Than 500kg/M3
Raw Materials:	Cement, Lime, Silica Sand and So on
Useage:	Household Wall , Partition Wall , Fence
Material:	Composite Polymer
Color:	Opal White

Product Description

Production Description:
AAC panels ALC block AAC bricks 
- Lighter than water 
- Fireproof last 4 hour 
- Self-Thermal insulation 
- Easy install
- High-performance and lightweight 
- High productivity competitive price 
- Autoclaved aerated concrete alc aac panels and blocks

Characteristics of AutocCaved Lightweight Concrete AAC Panels
- Good strength
- Lightweight
- Sound Insulation
- Heat insulation
- Anti-Vibration
- Fireproofing
- Environment friendly

Strength level	A2.5	A3.5	A5.0	A7.5
Volume density level	B04	B05	B06	B07
Desiccated level	≤425	≤525	≤625	≤725

Full name	Autoclaved aerated AAC panels
Width	600mm
Type	For wall,floor and roof
Thickness	50/75/100/125/150/175/200mm
Usage	Household Wall , Partition Wall , Fence
Length	Depend on thickness and usage
Color	White
Dry Density	Less Than 500kg/M3
Dry Thrinkage	0.48mm/M
Thermal Conductivity	0.13W/M*K

Packing&Shipping
Reinforced deformed bar AAC Exterior Interior Wall Panel
1)Packaging Details: plywooden pallet with conner protectors on all sides , outside with polybag.
2)Delivery Detail: within 10 days after payment


ALC panel specification:
AAC block supplier autoclave aerated concrete block aac panel

Item		Parameter Index Specifications
		50	75	100	125	150	175	200
1	Anti-impact capacity/times	≥5	≥5	≥5	≥5	≥5	≥5	≥5
2	Compressive strength/Mpa	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5
3	Softening coefficient	≥0.8	≥0.8	≥0.8	≥0.8	≥0.8	≥0.8	≥0.8
4	Surface density(kg/m2)	≤70	≤70	≤90	≤90	≤110	≤110	≤130
5	Moisture rate(%)	≤10	≤10	≤10	≤10	≤8	≤8	≤8
6	Dring shrinkage value(mm/m)	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5
7	Hang force(N)	≥1000	≥1000	≥1000	≥1000	≥1000	≥1000	≥1000
8	Sound insulation capacity in the air(dB)	≥35	≥35	≥40	≥40	≥45	≥50	≥55
9	Fire endurance(h)	≥1.5	≥1.5	≥2.5	≥2.5	≥3.0	≥4.5	≥6.0
10	Heat transfer coefficient(w/m2.k)	≤2.0	≤2.0	≤2.0	≤2.0	≤2.0	≤2.0	≤2.0
11	Inner radiation index	≤1	≤1	≤1	≤1	≤1	≤1	≤1
12	Outer radiation index	≤1	≤1	≤1	≤1	≤1	≤1	≤1
13	Frost resistance (shall show no visible cracks and surface without change)	_	_	shall show no visible cracks and surface without change
14	The combustion properties (A1 or A2)	_	_	A1 or A2

Advantage of AAC block
Autoclaved Aerated Concrete ALC AAC Panel
AAC block is a high quality building material manufactured from quartz sand ,lime ,cement, aluminum compound and water several natural chemical reactions take place during the manufacturing process that account for AAC 's high strength ,light-weight and thermal properties .


Main Equipments in AAC Production Line:
Crusher: Lime, gypsum, and such kind of bulk material need to be crushed as the first step in AAC Plant. 
Ball Mill: The AAC material must be fully grinded in order to make better reaction. Ball Mill is used widely, it has two types: dry and wet, can be chosen upon requirement.
Computer Control Automatic Metering System is commonly used as measurement of raw materials.
Material mixer: it's the slurry mixing machine, also is slurry casting machine.
Casting Machine: this machine is used to mix well all the measured materials until reaching to the pysicaland chemical index.
Cutting Machine: the AAC blank is formed after casting and pre-curing, as the size is too large, it must be cut to achieve the required product size.
Autoclave: Autoclave is a device for silicate hydration products to get physical and mechanical properties.
Boiler: the boiler supports for the autoclave and pre-heat furnace and other facilities with heat.
Mould Frame, Mould Bottom and Mould Car, they composed together to form the Casting Mould, which is the main forming equipments in AAC Production Line.
Hardening Car, Ferry Cart and Tilting Hangers, they must be equipped as auxiliary equipments in autoclave curing system.
Block Separator. The separator is a special machine whose function is to separator the plaste block into piece,in order to be transfered and used.
Block packing machine. 
Belt/bucket/screw conveyor.        
Powder/slurry silo or tank.
Slurry pump.
Ingredient Building.
Semi-product hunger
Mould taking off traveller
Grouping traveller 
Dust Remover


Company Information:
1)Established in 2002, Hangzhou Baosheng Metal Material Co., Ltd. is located in the hometown of steel structures: Xiaoshan District of Hangzhou City. Our company covers an area of 1000 square meters and enjoys convenient water, railway and freeway transportation. 
 2)Our company is specialized in researching, designing, manufacturing and distributing different sorts of constructional metallic materials. Our products include steel structures, galvanized and color-coated steel plates, corrugated ...  View detail