Vacuum Tube Heat Pipe Solar Energy Water Heater with Solar Keymark En12976

Product Specifications

Prod Model:	HIP-58
Capacity:	80L 100L 150L 200L 240L 300L
Inner Tank Material:	SUS304 or SUS316
Outer Tank Material:	SUS201 or SUS304 or SUS316
Bracket:	SUS201 or SUS304 or Aluminum
Accessories:	T/P Valve, Magnesium Rod, Safe Valve
Option 1:	1500W Electric Water Heater
Option 2:	Intelligent System Controller Tk-7y
Max. Capacity:	>200L
Structure:	Compact Type
Pressure:	Pressurized
Interior Material:	Stainless Steel
Collector Components:	Glass Vacuum Tube
Composition:	Bracket
Certification:	CCC

Product Description

100L to 300L Heat Pipe Solar Hot Water Heater System
HIGH PRESSURE HEAT PIPE SOLAR WATER HEATER MAKE BETTER BATHING EXPERIENCE.
1.Solar Water Heater Work Principle:The key of compact heat pipe pressure solar water hater is heat pipe, The heat pipe is hollow with the space inside evacuated, much the same as the solar tube. In this case insulation is not the goal, but rather to alter the state of the liquid inside. Inside the heat pipe is a small quantity of purified water and some special additives. At sea level water boils at 100oC (212oF), but if you climb to the top of a mountain the boiling temperature will be less that 100oC (212oF). This is due to the difference in air pressure.

Based on this principle of water boiling at a lower temperature with decreased air pressure, by evacuating the heat pipe, we can achieve the same result. The heat pipes used in AP solar collectors have a boiling point of only 30oC (86oF). So when the heat pipe is heated above 30oC (86oF) the water vaporizes. This va pour rapidly rises to the top of the heat pipe transferring heat. As the heat is lost at the condenser (top), the va pour condenses to form a liquid (water) and returns to the bottom of the heat pipe to once again repeat the process.

The top of heat pipe is pluged into the water tank, so the cold water inside the tank can get heat from heat pipe, and become hot water. Because the water tank is close, so it can endure 0.6Mpa(6 bar), when the tap go into the water tank from the bottom inlet, the hot water is out from the top outlet, just like the electric water heater.1, direct heating, high efficiency
2, pressurized hot water
3, Non-Freeze in winter
4, CE, SOLAR KEYMARK EN12976 certified
5, Factory audited by SGS.

2.Compact Heat Pipe Solar Hot Water Heater System Feature
1)Highly efficient absorber of high performance with daily average efficiency over 50%.
2)Start quickly, heat pipe transfers the heat energy into the storage tank in one direction.
3)With stand pressure of 6 bar, can be connected directly with tap water.
4)No water inside the vacuum tubes, the system can still work even with several tubes breakage.
5)Highly efficient insulation with polyurethane foam.
6)Simple structure, easy to assemble and install.
7)Can be used all year around in the cold climate.
8)Can be used together with auxiliary electric heater.
9) Stable and reliable performance.
10) Environmental protection and energy saving.
11) The pressurized hot water will make your bath more comfortable.


  

Model	Tube   Specification	Capacity	Loading quantity
			20'GP	40'GP	40'HQ
		(Liter)	(Sets)	(Sets)	(Sets)
HIP-58-10	Φ58mm*1800mm	100L	66	137	160
HIP-58-12	Φ58mm*1800mm	120L	57	120	140
HIP-58-15	Φ58mm*1800mm	150L	49	102	119
HIP-58-18	Φ58mm*1800mm	180L	42	87	102
HIP-58-20	Φ58mm*1800mm	200L	38	80	94
HIP-58-24	Φ58mm*1800mm	240L	33	69	81
HIP-58-30	Φ58mm*1800mm	300L	27	57	67
HIP-58-36	Φ58mm*1800mm	360L	23	49	57

Technical Parameter of Heat Pipe Compact Pressurized Solar Water Heater
DESCRIPTION	Compact pressurized solar  water  heater
MATERIAL  OF  OUT  TANK	0.4mm galvanized  steel/0.4mm  sus304 stainless  steel /0.4mm sus304-ba(bright)
MATERIAL  OF  INNER  TANK	1.2mm sus304-2b stainless  steel or sus316 stainless steeel
TANK  INSULATING  LAYER	50-60mm  high-density  polyurethane  foamed
DIAMETER  OUTER/INNER TANK	470/370mm
ELECTRICAL  HEATER	1500w;   220v/110v
INLET  AND  OUTLET  HOLE	Male 1/2",   3/4"
MAX  PRESSURE	1.2Mpa
SOLAR  COLLECTOR  TUBE	3.3  borosilicate  glass  with AL/AL-ALN/ALN(single target) or  CU/SS-ALN/ALN(three target)
THICKNESS  OF  GLASS  TUBE	1.6mm
VACUUM  TUBE  TIGHTNESS	P≤0.005  pa
ABSORPTION	As=0.93-0.96(am1.5)
EMISSION  RATIO	Ε h=0.04-0.06(80c± 5c)
IDLE  SUNNING  PROPERTY  PARAMETERS	Y=220~260m². C/kw
AVERAGE  HEAT  LOSS  COEFFICIENT	Ult=0.6~0.7w/(m2. c)
BRACKET:	1.2mm Stainless steel/1.6mm aluminum alloy/1.5mm galvanized  steel
STRUCTURE  OF  TANK:	Usually   holes  for  p/t valve, water  inlet  and  outlet, electric  heater, magnesium rod; custom-built will be warmly welcomed.
WELDING:	Automatic argon  arc  welding
FASTENER  PIECES:	Stainless  steel  screw
SEAL MATERIAL	Stabilized high temperature silicon
Opition:	System controller SR609C, control electrical heating and display temperature